MTD 31DE660 Snow Blower Manual

The MTD 31DE660 is a powerful snow blower designed to tackle heavy snowfall with ease. It features a 24-inch clearing width, a reliable 6.5 HP engine, and a 2-stage snow throwing mechanism that can throw snow up to 30 feet. This manual provides essential information on safety, operation, maintenance, and troubleshooting to ensure optimal performance.

1. Features at a Glance 2. Safety Information 3. Assembly Instructions 4. Operating Instructions 5. Maintenance 6. Troubleshooting 7. Specifications 8. Warranty Information

Features at a Glance

Key features include: 24-inch clearing width, 6.5 HP engine, 2-stage snow throwing, adjustable chute, and easy-to-use controls.

FeatureDescription
Clearing Width24 inches for efficient snow removal
Engine6.5 HP for reliable performance
2-Stage SystemThrows snow up to 30 feet
Adjustable ChuteDirects snow where you want it
Easy ControlsUser-friendly interface for operation

Safety Information

Always read the safety instructions before operating the snow blower. Wear appropriate clothing and safety gear, and ensure the area is clear of obstacles.

  1. Keep hands and feet away from moving parts.
  2. Do not operate in enclosed spaces.
  3. Always check for fuel leaks before starting.
  4. Shut off the engine before performing maintenance.

WARNING! Failure to follow safety instructions may result in serious injury.

Assembly Instructions

Follow these steps to assemble your snow blower:

  1. Attach the handle to the main body using the provided bolts.
  2. Install the chute and secure it with screws.
  3. Fill the fuel tank with the recommended fuel type.
  4. Check all connections and ensure they are tight.

CAUTION! Ensure all parts are assembled correctly to avoid malfunction.

Operating Instructions

To operate the snow blower:

  1. Start the engine using the ignition key.
  2. Adjust the throttle to the desired speed.
  3. Use the controls to direct the chute and start clearing snow.
  4. Monitor the fuel level and refill as necessary.

NOTE! Always operate the snow blower on a flat surface for best results.

Maintenance

Regular maintenance is crucial for optimal performance:

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startFuel issueCheck fuel level and quality.
Snow not clearingClogged chuteClear any obstructions in the chute.
Unusual noiseLoose partsInspect and tighten all bolts and screws.
Vibration during operationImbalanced bladesCheck and adjust the blades for balance.

NOTE! Always refer to the manual for detailed troubleshooting steps.

Specifications

Warranty Information

This snow blower comes with a 2-year limited warranty covering defects in materials and workmanship. For warranty claims, please contact MTD customer service.

MTD 31DE660 Snow Blower Manual © - All Rights Reserved 2026