MTD 602E Snow Blower Manual

The MTD 602E is a powerful snow blower designed for efficient snow removal. It features a 24-inch clearing width, a reliable 6.5 HP engine, and a 2-stage snow throwing system that can handle heavy snowfall. The snow blower is equipped with adjustable skid shoes, an electric start option, and a user-friendly control panel. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Maintenance 5. Troubleshooting 6. Specifications 7. Warranty Information

Features at a Glance

Key components: 24-inch clearing width, 6.5 HP engine, 2-stage snow throwing system, electric start, adjustable skid shoes.

FeatureDescription
Clearing Width24 inches for efficient snow removal
Engine6.5 HP for reliable performance
2-Stage SystemPowerful snow throwing capability
Electric StartEasy starting with the push of a button
Skid ShoesAdjustable for different surface types

Safety Information

Read the manual thoroughly before operating the snow blower. Always wear appropriate safety gear, including gloves and eye protection. Ensure the area is clear of debris before use.

WARNING! Keep hands and feet away from moving parts. Do not operate in enclosed spaces.

Operation Instructions

To start the snow blower, ensure the fuel tank is filled and the choke is set. Pull the starter cord or press the electric start button. Adjust the throttle and direction of the chute as needed.

  1. Check fuel and oil levels.
  2. Set the choke to the appropriate position.
  3. Start the engine and allow it to warm up.
  4. Adjust the speed and chute direction for optimal snow throwing.

CAUTION! Do not operate on steep slopes.

Maintenance

Regular maintenance is essential for optimal performance. Check the oil level before each use and change the oil after every 25 hours of operation. Clean the snow blower after each use to prevent rust and corrosion.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startFuel issueCheck fuel level and ensure fresh fuel is used.
Snow not clearingClogged chuteTurn off the engine and clear the chute of snow.
Excessive vibrationLoose partsInspect and tighten any loose bolts or screws.
Difficulty steeringWorn skid shoesReplace or adjust skid shoes as necessary.

Reset: Refer to the manual for reset procedures if applicable.

Specifications

Warranty Information

This product comes with a 2-year limited warranty covering defects in materials and workmanship. For warranty service, contact MTD customer support.

MTD 602E Snow Blower Manual © - All Rights Reserved 2026