MTD 737-0168 Snow Blower Manual

The MTD 737-0168 is a powerful snow blower designed for efficient snow removal. It features a robust engine, adjustable chute, and multiple speed settings to tackle various snow conditions. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Maintenance 5. Troubleshooting

Features at a Glance

Key components: Powerful engine, adjustable chute, multiple speed settings, and ergonomic handles for ease of use.

Feature	Description
Engine	Powerful engine for efficient snow clearing
Adjustable Chute	Allows for directional snow throwing
Speed Settings	Multiple speeds for different snow conditions
Ergonomic Handles	Designed for comfort during operation
Headlight	Illuminates the path during low visibility

Safety Information

Read all safety instructions before operating the snow blower. Always wear appropriate safety gear, including gloves and eye protection.

Keep hands and feet away from moving parts.
Do not operate in enclosed spaces.
Ensure proper maintenance is performed regularly.
Store in a dry place when not in use.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To operate the snow blower, follow these steps:

Start the engine according to the manual.
Adjust the chute to the desired direction.
Select the appropriate speed setting based on snow conditions.
Begin clearing snow by pushing the snow blower forward.

CAUTION! Always be aware of your surroundings while operating.

Maintenance

Check Oil Level: Regularly check and change oil as needed.
Inspect Blades: Ensure blades are sharp and free of debris.
Clean Chassis: Remove snow and ice buildup after each use.
Store Properly: Keep in a dry, sheltered location.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality; ensure choke is set correctly.
Snow not clearing	Clogged chute	Stop the engine and clear the chute of any obstructions.
Unusual noise	Loose parts	Inspect for loose bolts or components; tighten as necessary.
Vibration during operation	Imbalanced blades	Check blades for damage or imbalance; replace if necessary.

Service: For further assistance, contact MTD customer service.