MTD Bolens Premium 31AM63K2 Snow Blower Manual

The MTD Bolens Premium 31AM63K2 is a powerful snow blower designed for efficient snow removal. It features a robust engine, adjustable chute, and multiple speed settings to handle various snow conditions. Below are key sections for safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Maintenance 5. Troubleshooting 6. Specifications 7. Warranty Information

Features at a Glance

Key components: 24-inch clearing width, 208cc engine, 180-degree adjustable chute, and six-speed transmission.

Feature	Description
Clearing Width	24 inches for efficient snow removal
Engine	208cc engine for powerful performance
Chute Control	180-degree adjustable chute for directing snow
Transmission	Six-speed transmission for optimal control
Headlight	Built-in headlight for visibility in low light

Safety Information

Read the manual carefully before operating the snow blower. Follow all safety precautions to prevent injury.

Always wear appropriate clothing and safety gear.
Keep hands and feet away from moving parts.
Do not operate in enclosed spaces.
Ensure proper maintenance is performed regularly.

Operation Instructions

To operate the snow blower, follow these steps:

Start the engine using the ignition key.
Adjust the throttle to the desired speed.
Use the chute control to direct snow as needed.
Clear snow in a systematic pattern for best results.

WARNING! Never operate the snow blower without proper training.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Check oil levels before each use.
Inspect and clean the air filter regularly.
Sharpen or replace the auger blades as needed.
Store in a dry place during off-season.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality; ensure fuel is fresh.
Snow not clearing	Clogged auger	Inspect and clear any obstructions in the auger.
Chute jams	Snow buildup	Stop the engine and clear the chute manually.
Excessive vibration	Loose parts	Inspect and tighten any loose bolts or screws.

Service: For further assistance, contact customer support.